↧
EZ-FLASH OMEGA kernel 1.07 released
↧
EZ FLASH OMEGA NO NINTENDO LOGO HELP?!
Hi there,
I just purchased the EZ Flash Omega from an eBay site and I followed along the tutorial, however, when I put the cart into my GBA SP, it shows no Nintendo logo and does not boot. I tried cleaning the contacts on both the cart and the micro SD. Not sure if there's an issue with the formatting. I formatted it to FAT 32 on my mac. It's a 16 GB sandisk.
Disappointed I can't get it working, anyone can offering any suggestions would be greatly appreciated.
I just purchased the EZ Flash Omega from an eBay site and I followed along the tutorial, however, when I put the cart into my GBA SP, it shows no Nintendo logo and does not boot. I tried cleaning the contacts on both the cart and the micro SD. Not sure if there's an issue with the formatting. I formatted it to FAT 32 on my mac. It's a 16 GB sandisk.
Disappointed I can't get it working, anyone can offering any suggestions would be greatly appreciated.
↧
↧
EZflash Jr. won't boot in DMG or CGB
I just got my card in (from a USA-located seller on eBay), and when I attempt to start it up on my DMG-001 or my CGB boot fails at the "Game Boy" splash screen with no Nintendo logo (nor the solid black bar that indicates no cartridge at all being present). Any pointers? I've tried two different 16GB SDHC cards, both partitioned for full capacity and partitioned down to four gigabytes. I've also tried Firmware 3, Firmware 4, and a preliminary version of Firmware 5. Have I been duped?
↧
Enable EZF Omega patching in homebrew code?
I'm talking about my own homebrew that I'm writing (libgba/devkitpro based, nothing weird), not some random hb rom I've downloaded.
As it is, the Omega's patches for savestates/sleep don't take effect on it. They would be nice to have, at least until I figure out what kind of saving system I'm gonna have etc. Anyone know what I'd need to do to make them work? I'm guessing it's gonna be to do with interrupt configuration.
edit: Oh while I'm here - any idea how to trigger sleep mode from my...
Enable EZF Omega patching in homebrew code?
As it is, the Omega's patches for savestates/sleep don't take effect on it. They would be nice to have, at least until I figure out what kind of saving system I'm gonna have etc. Anyone know what I'd need to do to make them work? I'm guessing it's gonna be to do with interrupt configuration.
edit: Oh while I'm here - any idea how to trigger sleep mode from my...
Enable EZF Omega patching in homebrew code?
↧
EZ FLASH JR don´t boot
hi all, my EZ Flash Jr. dont boot, always get a gameboy logo and glitch nintendo logo. just a very few times the card UI launch, already clean the EZ Flash Jr- and the gbc.
This video show de problem
Any ideas?
PD: It´s the same on my GBA.
This video show de problem
Any ideas?
PD: It´s the same on my GBA.
↧
↧
LSDJ SRAM Check Fails on EZ Flash JR and won't run
Hello all!
I'm currently trying to use a EZ Flash JR cart on my CGB, and I can't get LSDJ to boot, it always hits the SRAM Check and fails with the message "SRAM Check Fail: Please clean the pins or change the battery" I'm using FW1.04 with LSDJ 7.0.2
I'm stumped as everything so far I have tried has not worked, and i don't have any other ROMs i can use to check and see if it's a faulty cart, I'm Not quite sure what to do, as i'm very new to flashcarts and gameboy related things
I'm currently trying to use a EZ Flash JR cart on my CGB, and I can't get LSDJ to boot, it always hits the SRAM Check and fails with the message "SRAM Check Fail: Please clean the pins or change the battery" I'm using FW1.04 with LSDJ 7.0.2
I'm stumped as everything so far I have tried has not worked, and i don't have any other ROMs i can use to check and see if it's a faulty cart, I'm Not quite sure what to do, as i'm very new to flashcarts and gameboy related things
↧
Are there any people with EZ Omega that havent had issues?
Where saves didn't corrupt when they took necessary precautions, no freezing, etc etc. and they've had their cart for a while now (since I think its been out 1.5 years, or coming up on 2 in a few months)
Seems like there's lots of wonky issues with this.
And now the Jr, hasnt been out long, but some people saying it doesn't even work at all. Completely different product since its their first stab at GB/GBC but
they are pioneers of GBA flash carts I think, the EZ flash team.
Is FAT32 or...
Are there any people with EZ Omega that havent had issues?
Seems like there's lots of wonky issues with this.
And now the Jr, hasnt been out long, but some people saying it doesn't even work at all. Completely different product since its their first stab at GB/GBC but
they are pioneers of GBA flash carts I think, the EZ flash team.
Is FAT32 or...
Are there any people with EZ Omega that havent had issues?
↧
Guide - How to convert YouTube videos to Game Boy Advance ROM files
Hello GBATemp!
Today I have a guide on how to watch YouTube videos on your Game Boy Advance, using some old, old software!
Step 1: Download the video of your choice in mp4 format using the method of your choice.
Step 2: Use the site linked here to convert that mp4 video to a properly formatted AVI video. https://video.online-convert.com/convert-to-avi
Step 3: Download the tools that I have linked here. https://github.com/Sterophonick/mirror-meteo-avi2gba
Step 4:...
Guide - How to convert YouTube videos to Game Boy Advance ROM files
Today I have a guide on how to watch YouTube videos on your Game Boy Advance, using some old, old software!
Step 1: Download the video of your choice in mp4 format using the method of your choice.
Step 2: Use the site linked here to convert that mp4 video to a properly formatted AVI video. https://video.online-convert.com/convert-to-avi
Step 3: Download the tools that I have linked here. https://github.com/Sterophonick/mirror-meteo-avi2gba
Step 4:...
Guide - How to convert YouTube videos to Game Boy Advance ROM files
↧
EZFlash Omega Skins
So now, skinning the ez flash iv has become very popular, so i decided to modify the ezkernel.bin upgrade file another splash screen, which i used on my ezflash iv already.
The serif font is very annoying also.
I did not found a skin tool so i wrote my own.
I'ts currently only working with the original ezkernel.bin with FW 3 and K 1.01
It's based on replacing the raw bitmaps in the rom, very simple.
But i did not found the blue EZ FLASH splash Screen, only the second with the explosino and...
EZFlash Omega Skins
The serif font is very annoying also.
I did not found a skin tool so i wrote my own.
I'ts currently only working with the original ezkernel.bin with FW 3 and K 1.01
It's based on replacing the raw bitmaps in the rom, very simple.
But i did not found the blue EZ FLASH splash Screen, only the second with the explosino and...
EZFlash Omega Skins
↧
↧
New to GBA, some questions
Yesterday I received my EZ Flash Omega and followed the manual on the corresponding website. I read something about NOR flash. What are the advantages of using NOR flash?
Also I have a AGS 101 display with a brown ribbon cable and 40 Pin. Sadly, the ribbon cable adapter is broken and I need to buy a new one. I think I need the 40 Pin B model?
Thanks in advance![:)]( "smile :)")
Also I have a AGS 101 display with a brown ribbon cable and 40 Pin. Sadly, the ribbon cable adapter is broken and I need to buy a new one. I think I need the 40 Pin B model?
Thanks in advance
↧
EzFlash Jr not loading any game
Hello all,
I am bummed to say that my ezflash jr isn't loading any game.
I am on kernel 1.04e and fw 4
The flash card's menu boot and works just fine, but when choosing a game it just goes t a blank screen, even the reset button doesn't work
I've tried reflashing the fw and will try reformatting the sd card.
Any help would be greatly appreciated
EDIT : My sd card got corrupted, so when plugging it into windows 10 it recovered and fixed the errors no problem.
I did end up backing up the...
EzFlash Jr not loading any game
I am bummed to say that my ezflash jr isn't loading any game.
I am on kernel 1.04e and fw 4
The flash card's menu boot and works just fine, but when choosing a game it just goes t a blank screen, even the reset button doesn't work
I've tried reflashing the fw and will try reformatting the sd card.
Any help would be greatly appreciated
EDIT : My sd card got corrupted, so when plugging it into windows 10 it recovered and fixed the errors no problem.
I did end up backing up the...
EzFlash Jr not loading any game
↧
Problems updating my EZ-Flash Vi
So, once again, I found my NDSi and wanted to play some games. Because my shoulder buttons are broken, I wanted to use the EZ-Flash Vi with my other device, a NDSi XL. But that didn't work, so I formatted the MicroSD Card and tried to install the newest Kernel (3.0 ob8) on it, but it didn't work. Next I tried to use the older Kernel (2.0), but now the system looks completely different. I tried to install a newer firmware (v104), but it says I at least need v101 to install it. Now, my first...
Problems updating my EZ-Flash Vi
Problems updating my EZ-Flash Vi
↧
Ez-Flash Jr. RTC don't work if the cartridge is not played.
Hi everyone, I have the Ez-Flash Junior but the RTC don't run if the cartridge is out of the Game Boy, only runs if I'm playing... It's normal?
I tested with the testflight and the latest stable release and didn't work...
Edit: I guess the battery is working because the "Auto save" option is checked...
Thanks!
I tested with the testflight and the latest stable release and didn't work...
Edit: I guess the battery is working because the "Auto save" option is checked...
Thanks!
↧
↧
How to make custom skins for EZ-Flash IV?
Hi guys!
So heres the deal..i hate default skins on my EZ 4, so i want to make my own skins.
Is there some easy to use graphical edotor/skin maker for my EZ-flash IV (thats 4...the white one with mini SD's)
I use kernel v2.05 (i believe thats the latest one), and i still want to use that one.
Do you think you can help please?
So heres the deal..i hate default skins on my EZ 4, so i want to make my own skins.
Is there some easy to use graphical edotor/skin maker for my EZ-flash IV (thats 4...the white one with mini SD's)
I use kernel v2.05 (i believe thats the latest one), and i still want to use that one.
Do you think you can help please?
↧
Unofficial EZ Flash Omega kernel by veikkos
Current release is k1.06_fw7-veikkos5. Kernel is based on latest official kernel k1.06_fw7.
In addition to original theme, starting from version 5 kernel is also available with fancy red theme. Thanks to @Nona_Elexis for the graphics!
Release notes:
Unofficial EZ Flash Omega kernel by veikkos
In addition to original theme, starting from version 5 kernel is also available with fancy red theme. Thanks to @Nona_Elexis for the graphics!
Release notes:
- Updated to...
Unofficial EZ Flash Omega kernel by veikkos
↧
EZ Flash Omega or Krikzz Everdrive X5 Mini?
I figure a poll would be fun
↧
My GBA SP is not running the supercard micro sd
I have two GBA SP, both model AGS-001. They both work with all types of cartridges (GB, GBC, and GBA) normally. I made the purchase of two Supercard Micro SD, only in one of my GBA SP does not work. The two Supercards work normally on the other GBA SP. Has anyone ever been through this problem or can you tell me why this is happening? I inform you that the two Supercad is in the last version of firmware, v1.85. It follows image showing the screen of GBA SP that is not accepting the...
My GBA SP is not running the supercard micro sd
My GBA SP is not running the supercard micro sd
↧
↧
Can't save in Super Monkey Ball Jr with my EZ-Flash IV
Does anybody know how to solve this issue? Thanks in advance
↧
GBA X5 Mini: Red Screen
I just received the GBA X5 Mini today, and I'm having trouble getting the thing to load successfully. After the Nintendo logo, the screen displays just red.
I've tried a 2GB microSD that is normally in an EZ-Flash IV, and a 64GB microSDHC UHS-1 but without any difference. It does the same thing without a card in it at all too.
Lookin for help figuring out if I need to format the cards in any special manner, or if it should boot without a card in it at all? It didn't come with instructions...
GBA X5 Mini: Red Screen
I've tried a 2GB microSD that is normally in an EZ-Flash IV, and a 64GB microSDHC UHS-1 but without any difference. It does the same thing without a card in it at all too.
Lookin for help figuring out if I need to format the cards in any special manner, or if it should boot without a card in it at all? It didn't come with instructions...
GBA X5 Mini: Red Screen
↧
Some first impressions of ez flash JR
Green Joy-Con D-Pad Shells for Nintendo Switchhttps://imgur.com/CmE7pgc
https://imgur.com/bV5qQ7j
https://imgur.com/qUnZ8hW
https://imgur.com/Joax26F
https://imgur.com/BNf0W4L
https://imgur.com/sCVYnap
https://imgur.com/xZiT4ns
https://imgur.com/Ezx5JXt
https://imgur.com/tVUbaki
https://imgur.com/tZU6mYQ
https://imgur.com/b1r6Iwd
https://imgur.com/MAso3zJ
So...
Some first impressions of ez flash JR
↧